Quick Start Guide
3
Power
– Now for the easy part: Find the supplied 24VDC power adapter. Plug
its end into the
24 VDC
jack; plug the other end into a power outlet. Your mixer
powers ON immediately. There’s no power switch, since mixers of this sort are
usually installed as part of a sound system – and with no switch to leave OFF by
mistake, there’s one less thing to go wrong! A powered
VGM-1041
always
shows at least one illuminated LED on its front panel.
l
Level Meter
– Start your audio source playing. On your mixer’s front panel,
increase both
AUX
controls until you see an indication about halfway up on the
LED level meter
.
Is This Thing Working?
– Turn down your amplifier’s
gain
or
volume
control,
and then power it ON. Advance the control until you hear your sound playing.
It’s In Your Head
– If you have a pair of headphones handy, plug them into the
jack at the far right – the sound appears there as well. The knob directly under
the headphone jack controls your headphone volume.
C O M P R E S S
AUX 2
VGM1041
1
AUX 1
MAIN
OUT
MONITOR
OUT
VOICE
OUT
24 VDC
Connect the DC
power adapter
