Chapter 2
15
Main
The Setup Main menu includes the following main setup categories.
In the descriptive table following each of the menu screenshots, settings in
boldface
are the default and
suggested settings.
Parameter
Description
System BIOS
Version
Version number of the BIOS setup utility.
Build Date
Date when the BIOS setup utility was built
Processor
Type of CPU installed on the system.
Core Frequency
Core speed of the CPU installed on the system.
Count
Physical CPU count
Memory
Size
Total size of system memory installed on the system.
Product Name
Product name of the system.
System Serial Number
Serial number of the system.
Asset Tag Number
Asset tag number of this system.
System Date
Set the date following the weekday-month-day-year format.
System Time (hh:mm:ss)
Set the system time following the hour-minute-second format.
Summary of Contents for Veriton X2610
