28
Chapter 2
IDE Primary/Secondary Channel Master/Slave
The following screen appears if you select any of the IDE drive parameters:
NOTE: *These items can only be seen when you are in the Advanced Level.
The following table describes the parameters found in this menu. Settings in boldface are the default and
suggested settings.
Parameter
Description
Options
Device Detection Mode
Lets you specify the type of hard disk installed in your
system. If you want BIOS to automatically configure
your hard disk, select
Auto
. If you know your hard
disk type, you can enter the setting manually.
Setting this parameter also sets the Cylinder, Head,
Sector, and Size parameters.
Auto, None, or User. The User
setting allows you to enter your
settings manually if you know
your hard disk type. The Auto
setting also sets the Cylinder,
Head, Sector, and Size
parameters.
Device Type
Display the type of device installed.
Not configurable. The default
is Hard Disk.
Cylinder
Specifies your hard disk’s number of cylinders, and is
automatically set depending on your Type parameter
setting.
Only Device Detection Mode is
set to User, the item Cylinder
will be available; Otherwise it is
non-configurable.
Head
Specifies your hard disk’s number of heads, and is
automatically set depending on your Type parameter
setting.
Only Device Detection Mode is
set to User, the item Head will
be available; Otherwise it is
non-configurable.
Sector
Specifies your hard disk’s number of sectors, and is
automatically set depending on your Type parameter
setting.
Only Device Detection Mode is
set to User, the item Sector will
be available; Otherwise it is
non-configurable.
Size
Specifies the size of your hard disk, in MB, and is
automatically set depending on your Type parameter
setting
It will turn to gray and will be
non- configurable.
Hard Disk LBA Mode
Set to “Auto” under DOS and Windows. Set to
“Disabled” under Novell Netware and Unix.
Auto or Disabled
IDE Primary/Secondary Channel Master/Slave
Device Detection Mode ............[Auto]
Device Type ....................Hard Disk
Cylinder .......................[-----]
Head ...........................[---]
Sector .........................[---]
Size ...........................[20520] MB
Hard Disk LBA Mode .............[Auto]
*Hard Disk Block Mode ...........[Auto]
*Hard Disk 32 Bit Access ........[Enabled]
*Advanced PIO Mode ..............[Auto]
*DMA Transfer Mode ..............[Auto]
Summary of Contents for Veriton 3000
