Acer Veriton 3000, Service Manual

Page: 35 / 140

30 Chapter 2
Onboard Peripherals
The Onboard Peripherals menu allows you to configure the onboard devices. Selecting this option from the
main menu displays the following screen:
NOTE: * This item can only be seen when you press
s
.
The following table describes the parameters found in this menu. Settings in boldface are the default and
suggested settings.
Parameter Description Options
Serial Port 1 Lets you enable or disable the serial port 1. Enabled or Disabled
Base Address Lets you set a logical base address for each
serial port. This parameter is configurable
only if the Serial Port parameter is enabled. 3F8h, 2F8h, 3E8h, 2E8h
IRQ Lets you assign an interrupt for each serial
port. This parameter is configurable only if
the Serial Port parameter is enabled. 4 or 3
Serial Port 2 Lets you enable or disable the serial port 2. Enabled or Disabled
Base Address Lets you set a logical base address for each
serial port. This parameter is configurable
only if the Serial Port parameter is enabled.
IRQ Lets you assign an interrupt for each serial
port. This parameter is configurable only if
the Serial Port parameter is enabled.
Parallel Port Lets you enable or disable the parallel port. Enabled or Disabled
Base Address Lets you set a logical base address for the
parallel port. This parameter is configurable
only if the Parallel Port parameter is enabled. 378h, 278h
Onboard Peripherals
Serial Port 1 .................... [Enabled]
Base Address ................... [3F8h]
IRQ ............................ [4]
*Serial Port 2 .................... [Disabled ]
Base Address ................... [----]
IRQ ............................ [-]
Parallel Port .................... [Enabled ]
Base Address ................... [378h]
IRQ ............................ [7]
Operation Mode ................. [EPP]
ECP DMA Channel .............. [-]
Floppy Disk Controller ........... [Enabled ]
IDE Controller ................... [ Both ]
PS/2 Mouse Controller ............ [Enabled ]
USB Host Controller .............. [Enabled ]
USB Legacy Mode ................ [Disabled]
Onboard Audio Chip ............... [Enabled ]
Game Port Address ................ [209]
MIDI Port Address ................ [300]
MIDI Port IRQ .................... [5]
Onboard Ethernet Chip ............ [Enabled ]