manualshive.com logo in svg

Acer TravelMate P643-V, Service Manual

Share
Download
Acer TravelMate P643-V Service Manual Download Page 69

System Utilities

2-17

Using DMI Tools

0

The 

DMI

 (Desktop Management Interface) 

Tool

 copies BIOS information to EEPROM 

(Electrically Erasable Programmable Read-Only Memory). Used in the DMI pool for hardware 
management.

LAN EEPROM Utility

0

LAN EEPROM Utility enables to change the MAC address.

Perform the following steps to use the LAN EEPROM Utility:

1.

Create a DOS bootable USB HDD.

2.

Copy the contents of the MAC folder to the HDD and remove the HDD form the computer.

3.

Reboot the computer and press 

F2

 during the boot sequence to enter the setup menu.

4.

Select the Boot menu item and move the entry “USB HDD” to the first position. 

Figure 2-15.

BIOS Boot

5.

Connect the USB HDD and reboot the computer.

6.

At the command prompt, navigate to the LAN EEPROM utility folder.

7.

Execute the < 

MAC.BAT

> file.

8.

At prompt type in MAC address.

9.

Press 

Enter

.

10. Reboot when the process has completed. 

Summary of Contents for TravelMate P643-V





















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands