Acer TravelMate P643-V Service Manual Download

Page: 179 / 244

Troubleshooting

4-5

No Display Issues

If the Display does not work, perform the following, one at a time. Do not replace a
non-defective FRU:

Figure 4-2.

No Display Issue

No POST or Video

If the POST or video does not appear, perform the following one at a time.

Make sure that internal display is selected. Switch between the internal and external
display by pressing

NOTE:

NOTE

This hotkey may not apply to all models. Refer to the computer’s user manual for the
applicable hotkey sequence.

Make sure the computer has power by checking for one of the following:



Fans start up



Status LEDs illuminate

If there is no power, refer to the “

Power On Issues”

section on page

4-4

Summary of Contents for TravelMate P643-V





















































































































































































































































Search results

Summary of Contents for TravelMate P643-V

Reviews:

Related manuals for TravelMate P643-V

Brands by name

Popular brands

Acer TravelMate P643-V, Service Manual

Search results

Summary of Contents for TravelMate P643-V

Reviews:

Related manuals for TravelMate P643-V

Brands by name

Popular brands