64
Chapter 3
3.
Detach the front bezel out from the LCD module
4.
Disconnect the LCD power cable from here
5.
Disconnect the LCD coaxial cable from here
6.
Detach the invertor board out from the position
7.
Remove the one screw on each side to detach the LCD panel from the case
8.
Lift up the panel then take it out from the case
9.
Remove the one screw on each side to detach the antenna from the case
10.
Gently to tear the tabs that fasten the antenna cables from the case
11.
Then detach the antenna cables from the case
12.
Remove the four screws on this side to detach the left bracket
13.
Remove the four screws on another side to detach the bracke
Summary of Contents for TravelMate 4150
