![Acer TravelMate 4150 Service Manual Download Page 59](http://html2.mh-extra.com/html/acer/travelmate-4150/travelmate-4150_service-manual_4696490059.webp)
50
Chapter 2
The table below describes the parameters in the screen. Settings in
boldface
are the default and suggested
parameter settings.
Description
Option
Infrared Port (FIR)
FIR I/O Settings
Sets the base I/O address and IRQ for
Infrared port.
Disabled
COM1, 3F8, IRQ4
COM2, 2F8, IRQ3
COM3, 3E8, IRQ4
COM4, 2E8, IRQ3
DMA Setting for Fast IR
Sets a DMA channel for the printer to
operate in ECP mode. This parameter is
enabled only if Mode is set to ECP
DMA1,
DMA2
, DMA3
Mode Setting for IrDA
Normak (16550), IrDA (HPSIR), ASK IR,
FAST IR
Legacy USB Support
Legacy USB Support
Disabled: Disable support for Legacy Universal Serial Bus.
Enabled: Enable support for Legacy Universal Serial Bus.
Summary of Contents for TravelMate 4150
