First things first
Set up the Acer p600 Series Portable Navigator in your vehicle
xvii
5
Dock the device on the car holder.
6
Adjust the car mount for the best viewing angle.
7
After setting up the device on the car mount, connect the car charger.
The power LED indicator lights up orange during charging.
NOTE: If the car engine is turned off, you may be required to switch the vehicle ignition back
into the Accessories position. Consult your vehicle owner’s manual.
NOTE: The device comes with the battery pre-charged to at least 30% capacity. You can start
using it once it is mounted in your vehicle and connected to the cigarette lighter. However,
for maximum usage time you need to charge your device to full capacity. Go to "Recharging
the Acer p600 Series Portable Navigator" on page 5 for instructions.