Acer Aspire 1606, Service Manual

Page: 50 / 137

41 Aspire 1606
Advanced Information
The Advanced Information screen contains parameter values that define how your computer behaves on
system startup.
The following table describes the parameters in this screen. Settings in boldface are the default and suggested
parameter settings.
Parameter Description Options
Legacy Diskette A Enable or Disable Legacy Diskette A
Note: Selects floppy type. Note that 1.25MB
references a 1024 byte/sector Japanese media
format. The 1.25MB diskette requires a 3-Mode
floppy-disk drive. 1.44/1.25MB or Disabled
Primary Master Show IDE Primary Master HDD size.
User can enter submenu to set some detail
functions Auto , User, None or ATAPI
Removable
Secondary Master Show IDE Secondary Master Device Status.
User can enter submenu to set some detail
functions. Auto , User, None or ATAPI
Removable
Hyper Threading
Technology Enables 2nd logical processor.
Note: This setting is only available for CPU
3.06GHz or above. Disabled or Enabled
PCI IRQ Routing Set Default IRQ of PCI device.
Note: Menu used to set IRQ for PCI Devices. Auto/ User Select
Resume on LAN/Modem
Access Set Enabled or Disabled to wake on LAN/Modem
access. Enabled or Disabled
Reset Configuration Data Select “Yes” to clear the extended system
configuration (ESCD) data. No or Yes
System Boot From Hard
Disk Recovery Recovery from hard disk drive, which contains
ghost image. Enabled or Disabled
PhoenixBIOS Setup Utility
Information Main Advanced Security Boot Exit
Item Specific Help
Legacy Diskette A:
.
Primary Master
.
Secondary Master
Hyper Threading Technology
.
PCI IRQ Routing
Resume on LAN/Modem Access:
Reset Configuration Data:
System Boot From Hard Disk
Recovery
[1.44/1.25MB ]
[FUJITSU MHS2040AT]
[UJDA740 DVD/CDRW]
[Disabled]
[Enabled]
[No]
[Enabled]
Select Floppy Disk type.
F1 Help Select Item F5/F6 Change Values F9 Setup Defaults
Esc Exit Select Menu Enter Select Sub-Menu F10 Save and Exit