Acer Aspire 1606 Service Manual Download Page 20

Page: 20 / 137

Chapter 1

Indicators

The computer has seven easy-to-read status icons on the right of the display screen.

The Power and Standby status icons are visible even when you close the display cover so you can see the
status of the computer while the cover is closed.

Icon

Function

Description

Wireless LAN

This button is used to enable or disable the
wireless LAN (optional) function

Power

Lights when the computer is on.

Sleep

Lights when the computer enters Standby
mode and blinks when it enters into or
resumes from hibernation mode.

Media Activity

Lights when the floppy drive, hard disk or
Media drive is active.

Battery Charge

Lights when the battery is being charged.

Caps Lock

Lights when Caps Lock is activated.

Summary of Contents for Aspire 1606










































































































































Search results

Summary of Contents for Aspire 1606

Reviews:

Related manuals for Aspire 1606

Brands by name

Popular brands

Acer Aspire 1606, Service Manual

Search results

Summary of Contents for Aspire 1606

Reviews:

Related manuals for Aspire 1606

Brands by name

Popular brands