Acer AO756 Service Manual Download Page 68

Page: 68 / 219

2-27

System Utilities

In Windows OS, unzip the compressed BIOS ROM package (e.g. in this case,
“Q1VZC102.zip”).

Copy the files “Q1VZC102.bin” and “KAFE102A.ROM” to the root directory of the USB flash
disk.

Figure 2:37. Copy *.BIN Files to USB Disk

Press

+ <R> and type “

cmd

” to bring out the Command Line window.

Figure 2:38. Command Line Window

Combine EC (128 KB) and BIOS (5120 KB) into one ROM (5428 KB) file byt typing the
following:

Copy /b [EC ROM filename] + [BIOS ROM filename] BIOS.fd

Figure 2:39. Combine EC and BIOS files

NOTE:

Make sure the size of BIOS.fd is 5.12MB and that there is no other *.FD file in
the USB flash disk root directory.

Summary of Contents for AO756




























































































































































































































Search results

Summary of Contents for AO756

Reviews:

Related manuals for AO756

Brands by name

Popular brands

Acer AO756, Service Manual

Search results

Summary of Contents for AO756

Reviews:

Related manuals for AO756

Brands by name

Popular brands