System Utilities
2-6
Security
The Security tab allows the user to configure and protect the computer from unauthorized use.
Figure 2:3. BIOS Security
NOTE:
When prompted to enter the password, three attempts are allowed before system halts.
Resetting the BIOS password may require the computer to be returned to the dealer.
Parameter
Description
Supervisor Password Is
Displays “Set” if the supervisor password is set and “Clear” if the
supervisor password is not set.
User Password Is
Displays “Set” if the user password is set and “Clear” if the user
password is not set.
HDD Password Is
Displays “Set” if the HDD password is set and “Clear” if the HDD
password is not set.
Set Supervisor Password
Option to set the supervisor password.
Set User Password
Option to set the user password. Enabled only when the supervisor
password is set.
Set HDD Password
Option to set the HDD password.
Password on Boot
Enable or disable the computer to prompt for the password on
system boot. When disabled, the password is only prompted when
entering the BIOS Setup Utility.
F9
Setup Defaults
F10
Save and Exit
F1
Esc
Help
Exit
Select Item
Select Menu
Enter
F5/F6
Select Sub-Menu
Change Values
InsydeH20 Setup Utility
Rev. 3.7
Main
Supervisor Password Is:
Clear
User Password Is:
Clear
HDD Password Is:
Clear
Set Supervisor Password
[Enter]
Set User Password
[Enter]
Set HDD Password
[Enter]
Password on Boot
[Disabled]
Information
Security
Exit
Boot
I t e m S p e c i f i c H e l p
I n s t a l l o r C h a n g e t h e p a s s w o r d a n d t h e
l e n g t h o f p a s s w o r d m u s t b e g r e a t e r o r
e q u a l o n e w o r d .
