Acer AM501, Service Manual

Page: 9 / 85

5
2.4 The AC Connection
Locate the AC port on the rear of the monitor.
Plug the female end of the AC cord into the AC port.
Plug the male end into the power supply.
Figure 3: Connecting the Power Cord
2.5 The Signal Cable Connection
Locate the ON/OFF power switch. See Figure 4.
Make sure that the Monitor power switch is in the OFF position. The OFF position is indicated with a
circular icon.
Figure 4: ON/OFF Power Switch
Locate the VGA port on the rear of the PC. The signal cable has a standard 15-pin mini D-sub (VGA)
connector. If you are having trouble locating the VGA port, please refer to the documentation, which
came with your PC.
Connect the Signal cable to the PC’s VGA port.
Figure 5: Connecting the Signal Cable