Acer AM501, Service Manual

Page: 17 / 85

13
4.5 Power inlet
Power shall be applied to the display device through a standard three wire receptacle NEMA A/5261
or equivalent.
4.6 Power cord
The power cord supplied with the monitor must conform to the International Standards described on part
8.0 and shall have physical and electrical characteristics such that to comply with any other specification
item. The power cord shall be of removable type.
4.7 Signal cable
Signals shall be applied to the display device through a shielded cable, which must be intended as part
of monitor. This cable shall be of a suitable type in order to comply with any specific item, and shall be
terminated in a 15 pin D-Shell male connector type AMP 211350-1 or equivalent, with pin assignment as
follows:
15 pin mini D-sub
1 Red video input
2 Green video input
3 Blue video input
4 Identify output
5 Ground
6 Red video ground
7 Green video input
8 Blue video ground
9 Not connected
10 Logic ground
11 Identify output
12 SDA (DDC1 or DDC2B)
13 Horizontal sync.
14 Vertical sync. (VCLK)
15 SCL (DDC2B)