Acer Altos R710 User Manual Download Page 20

Page: 20 / 214

1 System information

• SSI-compliant 34-pin, high-density 100-pin, and alternate 50-pin

control panel headers

• Intelligent Management Module 120-pin connector, supporting

the optional Professional server management modules

•

Chassis Intrusion

• Lockable front bezel
• Chassis intrusion switch
• Lock attach point for chassis cover

•

Up to eight system fans

• Four system fans in default configuration
• Two non-redundant fans in each power supply

•

LEDs

• Standard Control Panel: NIC1 Activity, NIC2 Activity & Power /

Sleep

• System Status (with optional light pipe kit, system status LEDs

can be viewed with bezel closed)

• Service ID
• Power subsystem: Status LED on each power module
• Fault LED for each system fan

•

Server Management / Diagnostics

• On-board Platform Instrumentation using the National

Semiconductor* PC87431M mini-Baseboard Management
Controller (mBMC) (Default).

• Support for optional Intelligent Management Module -

Professional Edition

• Support for Acer Altos Server Management 6.x
• Light-Guided Diagnostics on all field replaceable units (FRUs)

Summary of Contents for Altos R710























































































































































































































Search results

Summary of Contents for Altos R710

Reviews:

Acer Altos R710, User Manual, Page: 20 / 214

Search results

Summary of Contents for Altos R710

Reviews: