Acer Altos G610, User Manual, Page: 44 / 156

2 System tour 34
Installing the system into the rack
To install the system into the rack:
The rails allow the system to slide in and out of the rackmount for
maintenance purposes. Follow these steps to install the mounting rails:
1 Extend the component rail ( 1 ) from the mounting rail ( 2 ) until the
component rail release latch clicks. Hold down the latch and slip
the component rail out of the mounting rail. Do the same thing to
the other mounting rail.
Note: Each mounting rail consists of a fixed outer piece that
screws onto the mounting bracket and an inner sliding piece
controlled by a steel ball gearing movement. This inner sliding
piece is not detachable.
2 Put the component rails aside.
3 Attach the mounting brackets to the mounting rails. The
mounting brackets consist of two metal bars to be attached on
both ends of the mounting rails.
a Unlock the inner sliding rail using your finger.
b Push it forward.
c Slide the roller towards the lock.
AA G610.book Page 34 Monday, October 22, 2001 9:46 AM