Acer Altos G610, User Manual

Page: 139 / 156

129
ASM Pro Server Agent requires SNMP.NLM running with Control
Community set to 'public' to allow ASM Pro Console to communicate
with ASM Pro Server Agent.
ASMAGENT.NCF is the script file that loads all related modules of ASM
Pro Server Agent. To load the SNMP use the following command:
load snmp control=public
If you load SNMP.NLM before ASM Pro Server Agent, make sure that
the Control Community has been set up properly. For more
information, please refer to related documents about the SNMP Agent
for NetWare (NetWare SNMP).
Check AUTOEXEC.NCF to see if you have loaded SNMP. Notice that
because of the auto loading feature of NLM, you can not directly find
where SNMP is loaded. The most common module is TCPIP.NLM which
auto loads SNMP.NLM. If you are using TCP/IP, load SNMP by using the
command line
load snmp control=public before loading TCPIP.
For NetWare 4.x and Netware 5.x users, if you are using INETCFG.NLM
to configure the network, be sure to configure SNMP and make sure
that the SNMP.NLM is running with
Control Community set to ‘public’ .
To install the Novell NetWare Server Agent:
1 Insert the Management CD into your system’s CD-ROM.
2 At Netware server console, type:
load cdrom.
3 At Netware server console,type:
load EB450MgmtCD:\APP\ASM\Netware\setup.
4 You are asked if you want to install the ASM Pro Server Agent on
your system. Select
Yes to install.
The setup program detects the NetWare version and the model of
the server. It copies related NLM files into the SYS: SYSTEM
directory and C: of your NetWare server, and some needed
command lines are added into AUTOEXEC.NCF in SYS: SYSTEM.
5 If the Mylex GAM driver and GAM service is installed in your
NetWare system, the setup program asks you to install the Bbp
agent.
6 Press any key to continue. The ASM Pro Server Agent
Configuration Utility is launched.
AA G610.book Page 129 Monday, October 22, 2001 9:46 AM