3 System upgrade
42
10 Install the new processor.
(1) Hold the processor by its edges, then insert it in the socket.
Make sure that the alignment tabs on the socket fit the two
notches located on the edge of the processor. The pins are
keyed in such a way that you cannot install the processor in
the wrong orientation without bending the pins.
(2) Close the retention plate.
(3) Press down on the socket lever while pushing it towards the
center of the processor socket to engage it under the socket
hook.
11 Apply a thin layer of an Acer-approved thermal interface material
to the processor base and the bottom side of the HSF.
Make sure that only a
very thin layer
is applied so that both
contact surfaces are still visible.
Summary of Contents for Altos G330 MK2 Series
