Acer Altos G330 MK2 Series, User Manual

Page: 109 / 125

91
HDD activity indicator does not light.
Do the following:
• Make sure the HDD data and power cables are connected correctly.
• Check that relevant switches and jumpers on the hard drive and on
the backplane board (for hot-plugs HDD) are set correctly.
DVD drive activity indicator does not light.
Do the following:
• Make sure the IDE and power cables are properly connected.
• Check that relevant switches and jumpers on the drive are set
correctly.
• Check that the drive is properly configured.
DVD tray cannot be ejected.
Insert the tip of a paperclip into the small hole on the DVD drive.
Slowly pull the tray out from the drive until the tray is fully extended.
DVD drive cannot read a disc.
Do the following:
• Make sure you are using the correct type of disc.
• Make sure the disc is properly seated in the drive.
• Make sure the disc is free from scratches or any contaminant.
• Make sure the drive’s IDE and power cables are properly
connected.
Newly installed memory modules are not detected.
Do the following:
• Make sure the memory modules specifications comply with the
system requirements.
• Make sure the memory modules have been populated according
to the system guidelines.
• Make sure the memory modules are properly installed in their
slots.