101
LSI MegaRAID SAS 8708ELP RAID Configuration
Utility
This section briefly shows how to create RAID with LSI MegaRAID SAS
8708ELP.
To initialize the
LSI MegaRAID SAS RAID Configuration Utility
:
1
Turn on the server and the monitor.
If the server is already turned on, close all open applications, then
restart the server.
2
During POST, press
Ctrl
-
H
on the RAID BIOS prompt.
After POST completion, the Adapter Selection window will appear.
3
Click
Start
to launch the Configuration menu.
To load the factory default RAID setting:
1
On the Configuration menu, select
Adapter Properties
to display
the current adapter settings.
2
Click
Next
to change the adapter setting.
3
Change the setting of Set Factory Defaults from No to
Yes
, then
click
Submit
.
4
Press
Ctrl
+
Alt
+
Del
to reboot the server.
To create and initialize a RAID volume:
1
Access the Configuration menu.
2
Click
Configuration Wizard
.
3
Click
Add Configuration
, then click
Next
.
4
Click
Custom Configuration
, then click
Next
.
5
Use the
Ctrl
key to select the drives that you want to add into the
array.
6
After selecting the drives, click
Accept DG
, then
Next
.
7
Select the RAID Level you want to use.
8
Create the logical volume and specify its size on the Select Size
field, then click
Accept
.
9
After creating a logical volume on all of the RAID volume, click
Accept
, then
Yes
to save the configuration.
Summary of Contents for Altos G330 MK2 Series
