background image

Altos 12000 Series User’s Guide

cxxxviii

VGA Palette Snoop

This parameter permits you to use the palette snooping feature if you installed

more than one VGA card in the system.
The VGA palette snoop function allows the control palette register (CPR) to

manage and update the VGA RAMDAC (Digital Analog Converter, a color data

storage) of each VGA card installed in the system.
The snooping process lets the CPR send a signal to all the VGA cards so that they

can update their individual RAMDACs.  The signal goes through the cards

continuously until all RAMDAC data has been updated.  This allows the display

of multiple images on the screen.
The default setting is Disabled.

Some VGA cards have required settings for
this feature.  Check your VGA card manual
before setting this parameter.

Graphics Aperture Size

This parameter determines the effective size of the graphics aperture.  Graphics

aperture is the address range that the AGP video and the CPU use to manage

graphical objects.  The lowest setting is 8 MB and the highest is 256 MB.  The

default setting is 64 MB.

Summary of Contents for Altos 12000 Series













































































































































































Reviews: