manualshive.com logo in svg

Acer Altos 12000 Series, User Manual

Share
Download
Acer Altos 12000 Series User Manual Download Page 95

Index

xcv

4.2.4 External Cache

This parameter specifies the second-level cache memory size currently supported

by the system.   The available cache sizes are 256 KB to 2 MB.

4.2.5 Diskette Drive A

This parameter specifies the system’s current diskette drive A settings.  The

default setting is 1.44 MB, 3.5-inch.

4.2.6 Diskette Drive B

This parameter specifies the system’s current diskette drive B settings.  The

default setting is None.

4.2.7 IDE Primary Channel Master

This parameter specifies the current configuration of the IDE device connected to

the master port of the primary IDE channel.  The default setting is IDE CD-ROM.

4.2.8 IDE Primary Channel Slave

This parameter specifies the current configuration of the IDE device connected to

the slave port of the primary IDE channel.  The default setting is None.

4.2.9 IDE Secondary Channel Master

This parameter specifies the current configuration of the IDE device connected to

the master port of the secondary IDE channel.  The default setting is None.

Summary of Contents for Altos 12000 Series













































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands