Index
cxi
4.6 Power Management
The Power Management menu allows you to configure the system
power-management feature.
The following screen shows the Power Management parameters and their default
settings:
Power Management
Power Management Mode .................[Disabled]
IDE Hard Disk Standby Timer .........[----]
System Sleep Timer ..................[----]
Sleep Mode ........................[----]
Power Switch < 4 sec. . ...............[Power Off]
System Wake-up Event
Modem Ring Indicator ................[Disabled]
The above parameters marked with ‘*’ will only
appear if you access the Advanced Options
level in the Main Menu. Please refer to section
2.1 for more information.
4.6.1 Power Management Mode
This parameter allows you to reduce power consumption. When this parameter
is set to Enabled, you can configure the IDE hard disk and system timers. Setting
it to Disabled deactivates the power-management feature and its timers. The
default setting is Disabled.
IDE Hard Disk Standby Timer
This parameter allows the hard disk to enter standby mode after inactivity of 1 to
15 minutes, depending on your setting. When you access the hard disk again,
allow 3 to 5 seconds (depending on the hard disk) for the disk to return to normal
speed. Set this parameter to Off if your hard disk does not support this function.
Summary of Contents for Altos 12000 Series
