7
STEP 6 Light Bar/Strobe Alert Feature
“TIP”
Some Light/Siren Controllers allow for programming of both light and siren activation off one input.
A Choice of positive or negative output is provided.
AceK9 Wire Color:
Green
(-)
Green/Red
(+)
Green
(-)
wire provides a negative output (Low Current Ground Trigger 0.75A)
Green/Red
(+)
wire provides a positive output (12V+ when triggered Fused at 15A Max)
Light Controler Input Method
.
Connection:
Consult the instructions provided by the controller manufacturer for polarity
and programing.
Lights Using Standard 12V light methods
(+)
Lights activated by a switch or light controller's isolated Positive outputs.
Connection:
Connect the
Green/Red
wire to the light side of the switch or controller.
(12V+ when triggered Fused at 15A Max)
STEP 7 Siren Alert Feature
AceK9 Wire Color:
(
Violet
- or
Violet/Red
+)
A Choice of Positive and Negative Outputs are provided.
Violet
wire provides a negative output (Ground Trigger 3A Max)
Violet/Red
wire provides a positive output (B+ when triggered Fused at 15A Max)
Never connect to wire of emergency vehicles high power siren speaker.
Siren using programmable input
.
Violet
(-) or
Violet/Red
(+)
Connection
:
Most siren controllers provide a remote input to activate a siren tone
.
Consult the instructions provided by the controller manufacturer for polarity and programing.
Siren using a 12V car alarm speaker
.
(+)
Connection:
Violet/Red
wire to positive side of 12V siren speaker. Attach the speaker’s
ground wire to a good ground.
