2
This manual is used in conjunction with the vehicle specific
instructions sheet.
If the make, model and year do not match the vehicle instructions or the equipment
is being reinstalled in new vehicle Contact AceK9.Com Service Department.
When contacting AceK9 service, have your SERIAL NUMBER available.
________________________________________________________________________________________
Safety Warnings and Installation Information
Life Safety Equipment
It is vital that all Safety Features are installed, tested and working properly at the
time of installation
.
While installing, special attention needs to be made to
power and safety warnings
.
This Life Safety Equipment must be installed to Emergency Vehicle Up-fitting
Standards!
Refer to the vehicles service manual and modifiers guides during installation.
The window drop module is designed for vehicles with a rear seat K9 Transporter
and window guards
, to contain the K9 and prevent unauthorized access to the vehicle. If
dropping un-guarded windows anti-theft system, equipment vault, and K9 transporter are
recommended.
________________________________________________________________________________________
Warning:
Install Electronics modules in dry locations
(
Except Weather resistant, Sealed Window Relay Modules
designed for in door installation)
NEVER
install in the following locations, which are frequently subject to wet conditions'
On the floor boards.
Under the floor mats.
Under K9 transporter.
In engine compartment.
Against the air conditioner
housing/vents.
Under seats.
Under equipment consoles cup holders.
Connections exposed to moisture should be protected.
________________________________________________________________________________________
Safety Warnings
Do not install equipment in areas that interfere with vehicles safety systems (airbags, seat
belts). Use caution when drilling or installing screws, avoid wiring, fuel lines, or other
equipment that might be behind the surface.
Never run wires through a drilled hole without a grommet, wires chaffing against metal will
overtime cause malfunctions or vehicle fire. When using a grommet seal to prevent water
entry into vehicle. (use a sealant appropriately related for the location)
