MFT1x_Kurzübersicht_Brief Overview_V2.22_de_en
18 / 23
12.2 Connecting the power supply of the Vehicle Terminal
Depending of the usage of the MFT in forklifts or rider-controlled trucks with batteries or in conjunction with a
table power supply on mains there are different connection schemes.
12.2.1 Connection to mains (AC voltage e. g. 230 V, 50 Hz in Europe, 110 V, 60 Hz in the US)
Connection scheme (not true to scale)
MFT rear side
12.2.2 Connection to a battery (DC voltage)
Connection scheme (not true to scale)
12.2.2.1 Terminal version with 2-core voltage supply cable (without ignition)
Usage of a 2-wire power supply cable
MFT rear side
ACD table power supply
mains side,
voltage
depends on
the country .
mains plug
15pole
Sub.-D.
15pole
Sub.-D.
2 wire ACD power supply
cable
wire identi-
fication
„1“
minus (-)
-
+
-
battery,
12 V DC, 24 V DC
or 48 V DC
fuse 10A
slow-blow
positive pole
+
negative pole
wire identi-
fication „2“
plus (+)
