MFT1x_Kurzübersicht_Brief Overview_V2.22_de_en
15 / 23
ATTENTION
The device is equipped with the following radio systems: WLAN
Frequency bands:
WLAN
2.412 GHz
– 2.483 GHz
5.15 GHz
– 5.35 GHz
5.47 GHz
– 5.725 GHz
Bluetooth (Device Option)
2,402 GHz
– 2,480 GHz
HF-RFID (Device Option)
13,56 MHz
Max. transmission power in frequency bands:
WLAN 2.4 GHz band max. 100 mW
WLAN 5 GHz band max. 200 mW
Bluetooth max. 100 mW
HF-RFID max. 42 dbµA/m in 10 m distance (mag. field
strength)
ATTENTION
Please observe the following national regulatory restrictions for
wireless devices.
WLAN restrictions:
In the EU, the WLAN 5 GHz band (5.15 GHz
– 5.35 GHz) may only
be used indoors.
In France, WLAN may not be used at a value greater than 10 mW
outdoors (channels 8
–
13) when in the 2.454 GHz
– 2.4835 GHz
band.
NOTE
The following note applies to the devices MFT1x (MFT10, MFT12,
MFT15):
This is a Class A device (EN55032). This device can cause radio
interferences in living areas. In this case, the operator may be
requested to implement appropriate measures.
ATTENTION
Voltage may occur on the inside of the device, which may lead to
severe or even fatal injuries when touching live parts or handling
the device in an improper manner. It may also lead to severe
material damage.
The device may only be opened by trained specialists, and only
after consulting with ACD.
The device may only be attached in the position intended by the
holding bracket.
ATTENTION
Prior to each journey, the mounting bracket of the
MFT10/MFT12/MFT15 must be inspected for damage (tear,
deformation). Defective mounting brackets must be replaced for
your own safety.
ACHTUNG
Cables have to be fitted and mounted in a way that there is no
possibility of hooking of a barrier or that persons can be captured
by the cable when the vehicle moves.
This affects the cable of the power supply as well as the cables of
the interfaces (COM, USB, Audio).
