26
After recording is stopped, a DV control bar will appear on the
screen. This allows basic DV control utilizing this DVD recorder’s
remote control.
1. Press [
] [
] to select (
) and press [ENTER]
to fast-forward the DV Camcorder.
2. Press [
] [
] to select (
) and press [ENTER]
to rewind the DV Camcorder.
3. Press [
] [
] to select ( ) and press [ENTER] to
stop the DV Camcorder playing.
4. Press [
] [
] to select ( ) and press [ENTER] to
start the DV Camcorder playing.
5. Press [
] [
] to select ( ) and press [ENTER] to
pause the DV Camcorder playing.
Notes:
1. The DV-Link input jack on this unit is for use with DV
compatible camcorders only. However, this DVD recorder
may not be compatible with all DV camcoders. In this case,
use the AV input to record the content on DV instead.
2. Only DV signals can be input to the DV-Link jack on this
DVD recorder.
3. Do not connect a MICRO MV format video camcorder to
this DV-Link (IEEE-1394) jack.
DV control
R
ECORDING
DV Recording -- One-Touch Recording
Before you start to record DV contents
This unit allows basic DV control on screen. The on-screen functions
are accessed using the DVD recorder remote control.
1. Power on your TV and this DVD recorder.
2. Press the [HDD/DVD] button to set the target
device for the recording.
If “DVD” is set as the target device, press [ OPEN/CLOSE] to open
the disc tray and insert a recordable disc with the label side
facing up.
If a new recordable DVD-RW disc is used for recording, you need to
first select either “Quick Preparation” or “Full Preparation” and press
[ENTER] for the disc to be prepared for recording.
If a new recordable CD-R or CD-RW is used for recording, press
[
] [
] [
] [
] to select the disc format the disc is to be prepared
as and press [ENTER] .
3. Connect the DV Cable (IEEE-1394 4-pin to 4-pin
cable) to both the DV Camcorder and this DVD
recorder.
4. Power on the DV Camcorder. Set “Playback
mode” on the DV Camcorder.
5. “Pause” the DV Camcorder at the point when you
want to record.
6. Press [SOURCE] to change the “Signal-Input source”
and select the “DV” input.
7. Resume DV Camcorder playback and press
[RECORD] on the DVD Recorder to start
recording.
8. To pause recording.
Press [
PAUSE ] on the remote control to pause recording.
Press [
PAUSE ] again, if you want to resume recording.
9. To stop recording.
Press [ ] to stop recording.
