The ‘WEIGHT’ window displays ‘DOT--3’, press
【
↑
】
key to adjust the number of decimal points
within’0/1/2/3/4’, and press
【
TARE
】
key to confirm.
The ‘WEIGHT’ window displays ‘ZERO0.5’, press
【
↑
】
key to adjust the range of zero
within’0.5/1.0/1.5/2.0/2.5/3.0/3.5/4.0/4.5/5.0’, and press
【
TARE
】
key to confirm.
The ‘WEIGHT’ window displays ‘FULL’ and the maximum range of the scale in turn, press
【
↑
】
key
to adjust the maximum range, for example, the maximum range of 150kg scales would be ‘150.000’,
and press
【
TARE
】
key to confirm.
The ‘WEIGHT’ window displays ‘-LOAD-’ and the weight of the last calibration in turn, press
【
↑
】
key to input the weights loading this time, for example, if you loading 20kg farmar this time, input
‘020.000’, and press
【
TARE
】
key to confirm. Put the corresponding farmar on the scale plate, press
【
TARE
】
key to confirm after stabilization, and the calibration is completed.
During the weight calibration process, press
【
SETUP
】
key to exit.
9. Points for attention
1. THE SECURITY
：
The user must use the right way to access and use the power supply, check whether the
connection is in good condition. You must unplug the power cord before replacing the fuse.
2. MAINTENANCE
：
(1) Gently move the scale to avoid falling or collision.
(2) Clean the scale with a dry or wet cloth. When the water into the scale, do not clean to avoid
damage; Do not use organic solvents to avoid scaling deformation or paint peeling.
No matter whether the scale is powered on or off, do not place items or apply external forces that
exceed the maximum weighing capacity of the scale in order to protect the load cell.
3. OPERATION
：
(1) When using alternating current, check whether the AC light is on. If the light is not on, further
check the power cord to see if it is plugged in correctly or if the fuse has burned out. If necessary,
open the battery cover and disconnect the battery to determine whether the light is damaged.
(2) Handle it gently and weigh it accurately.
(3) Press keys with finger, or other key operation. Do not damage the keyboard by using a pencil,
ball pen, or hard nib.
