56
08424705001 (01) 2017-04 USA • Accu-Chek Inform II Operator’s Manual Version 6
Confirming or selecting the test
strip lot
Once you have entered and confirmed the patient ID, you
are asked to choose the lot number for the test strips.
Compare the number displayed by the meter to the
number on the label of the test strip vial.
1
Select the lot number as follows:
■
To read the lot number from the test strip vial via
barcode scanner, press and release
. Follow
the instructions for scanning IDs (see note below).
■
If you want to use the preselected lot number dis-
played by the meter, touch
to confirm.
■
To use a different lot number than the one dis-
played, touch
to display a list of stored lot
numbers. Select the desired lot number from the
list.
2
Touch
to confirm the selected or scanned lot
number.
The meter can be configured so that no QC lockout
occurs when you switch
between
stored test strip lots.
However, the selected test strip lot must already have
passed a glucose control test.
A QC Lockout will still occur if a test strip lot is stored
in the meter but no glucose control test has been run.
A glucose control test must always be performed before
using a lot for the first time.
Patient Test
Patient 123456789
Use Strip Lot
12:48 pm
123456?
03/17/17
Strip Lots
344789
545794
545777
344654
12:48 pm
03/17/17
Summary of Contents for Inform II
Page 3: ...08424705001 01 2017 04 USA Operator s Manual Version 6 0 A ACCU CCU CHEK HEK Inform II System ...
Page 245: ...245 Notes ...
Page 246: ...246 Notes ...
Page 247: ...247 ...