Accu-Chek Aviva Plus, Owner'S Booklet

Page: 33 / 116

31
Meter Memory, Setup, and Data Transfer
5
Setup
Setting the Beeper On or OFF
NOTE
The beeper prompts you:
• to apply blood or control solution to the test strip.
• when enough blood or control solution is drawn into the test strip.
• when the blood glucose or control test is complete.
• when a button is pressed.
• when it is time to perform a test (if you set the test reminders or post-meal test reminder).
• if an error occurred while performing a blood glucose or control test (even if the beeper is off, it still
beeps for an error).
Press and release to
turn the meter on.
The flashing test strip
symbol appears on the
display.
Press and
hold
until
set-up appears on the
display.
Press and release
repeatedly until the
flashing beeper symbol
and On or OFF appear on
the display.
Press and release or
to switch between On
and OFF .
To set up more options,
press and release .
To exit, press and
hold
until the flashing test strip
symbol appears on the
display.
3
1 2
51801_07021933001.indb 31 5/7/14 8:53 AM