338
E
ES4710BD 10 Slots L2/L3/L4 Chassis Switch
policy-map <
policy-map-name>
no policy-map <
policy-map-name>
Creates a policy map and enters policy
map mode; the “
no policy-map
<
policy-map-name>
” command deletes
the specified policy map.
class <
class-map-name>
no class <
class-map-name>
After a policy map is created, it can be
associated to a class. Different policy or
new DSCP value can be applied to
different data streams in class mode; the
“
no class <
class-map-name>
” command
deletes the specified class.
set {ip dscp <
new-dscp>
| ip precedence
<
new-precedence>
}
no set {ip dscp <
new-dscp>
| ip precedence
<
new-precedence>
}
Assigns a new DSCP and IP precedence
value for the classified traffic; the “
no set
{ip dscp <
new-dscp>
| ip precedence
<
new-precedence>
}
” command cancels
the newly assigned value.
police <
rate-kbps> <burst-kbyte>
[exceed-action
{drop | policed-dscp-transmit}]
no police <
rate-kbps> <burst-kbyte>
[exceed-action {drop | policed-dscp-transmit}]
Configures a policy to classify traffic,
data stream exceeding the limit will be
dropped or degraded; the “
no police
<
rate-kbps> <burst-kbyte>
[exceed-action {drop |
policed-dscp-transmit}]
” command
deletes the specified policy.
mls qos aggregate-policer
<
aggregate-policer-name> <rate-kbps>
<burst-kbyte>
exceed-action {drop
|policed-dscp-transmit}
no mls qos aggregate-policer
<
aggregate-policer-name>
Defines a policy set, perform different
actions to out-of-profile data streams,
such as discard or degrade. This policy
can be used in one policy map by several
classes; the “
no mls qos
aggregate-policer
<
aggregate-policer-name>
” command
deletes the specified policy set.
police aggregate <
aggregate-policer-name>
no police aggregate <
aggregate-policer-name>
Applies a policy set to classified traffic;
the “
no police aggregate
<
aggregate-policer-name>
” command
deletes the specified policy set.
4. Apply QoS to ports
Command Explanation
Interface Mode
mls qos trust [cos [pass-through-dscp]|dscp
[pass-through-cos]|ip-precedence [pass-through cos]|port
Configures port trust; the “
no
mls qos trust
” command