213
E
ES4710BD 10 Slots L2/L3/L4 Chassis Switch
Command mode:
Interface Mode and Global Mode.
Default:
GVRP is disabled by default.
Usage Guide:
Port GVRP can only be enabled after global GVRP is enabled. When global GVRP is
disabled, port GVRP configurations are also void. Note GVRP can only be enabled on Trunk ports.
Example:
Enabling the GVRP function globally and for Trunk port 1/10.
Switch(Config)#gvrp
Switch(Config)#interface ethernet 1/10
Switch(Config-Ethernet1/10)#gvrp
Switch(Config)#exit
9.3.3 Typical GVRP Application
Scenario:
PC
PC
Switch A
Switch B
Switch C
Fig 9-3 Typical GVRP Application Topology
Example: To enable dynamic VLAN information register and update among switches, GVRP
protocol is configured in the switch. Configure GVRP in Switch A, B and C, enable Switch B to
learn VLAN100 dynamically so that the two workstation connected to VLAN100 in Switch A and C
can communicate with each other through Switch B without static VLAN100 entries.
