493
E
ES4710BD 10 Slots L2/L3/L4 Chassis Switch
b. Configure maximum response time for IGMP queries
c. Configure timeout setting for IGMP queries
(3) Configure IGMP version
3
、
Disable IGMP
1.
Enable IGMP
There is no special command for enabling IGMP in ES4710BD layer 3 switches, the IGMP
automatically enables when any multicast protocol is enabled on the respective interface.
Command Explanation
Interface Mode
ip dvmrp enable | ip pim dense-mode
| ip pim sparse-mode
Enables IGMP protocol; the “
no pim
sparse-mode
” command disables IGMP protocol
(required)
2.
Configure IGMP sub-parameters
(1) Configure IGMP group parameters.
a. Configure IGMP group filtering criteria
b. Configure IGMP groups
c. Configure static IGMP groups
Command Explanation
Interface Mode
ip igmp access-group {<
acl_num |
acl_name
>}
no ip igmp access-group
Sets the filter criteria for IGMP group on the
interface; the “
no ip igmp access-group
”
command cancels the filter criteria.
ip igmp join-group <
A.B.C.D
>
no ip igmp join-group <
A.B.C.D
>
Joins the interface to an IGMP group; the “
no ip
igmp join-group
” command cancels the join.
