Accorroni AS COND, Installation Manual

Page: 5 / 56

5
GENERAL INFORMATION AND PRECAUTIONS
This machine is suitable for the following uses:
a) Direct heating of the blown air through its own fan unit.
The heat exchange occurs by contact between the external walls of the combustion chamber / heat exchanger and the air
that passes through it.
b) Ventilation only.
In mode (a), the machine must be equipped with a burner, connected to the electric power supply line, to the gas pipe and to
a suitable system for discharging the products of combustion and condensate.
In mode (b) it is sufficient to connect the machine to the power supply line.
This machine must be used for heating the room air.
Attention is drawn to the fact that the machine is not suitable for use for other purposes; and in particular it is
not suitable for use in normal operation at average air outlet temperatures above 80 ° C.
The manufacturer is solely responsible for the functional characteristics of the machine
if it is used in the manner and within the limits described in this manual.
Liability and Warranty
The manufacturer guarantees its new products from the date of installation in accordance with current regulations and / or in
accordance with the sales contract.
Verify, upon initial start-up, that the machine is intact and complete.
Failure to comply with what is described in this manual, operational negligence, incorrect installation and the execution of
unauthorized modifications, cause the manufacturer to void the machine warranty.
In particular, the warranty and liability rights expire in the event of damage to persons and / or things, if the damage itself is
attributable to one or more of the following causes:
- incorrect installation, commissioning, use and maintenance of the machine;
- improper, erroneous and unreasonable use of the machine;
- intervention of unskilled personnel;
- execution of unauthorized modifications to the machine;
- use of the machine with defective safety devices, incorrectly applied and / or not working;
- installation of additional components not tested together with the machine;
- supplying the burner with unsuitable fuels;
- defects in the fuel supply system;
- use of the machine even following the occurrence of an error and / or an anomaly;
- repairs and / or overhauls performed incorrectly;
- modification of the combustion chamber by introducing inserts that prevent the regular development of the
constructively established flame;
- insufficient and inappropriate supervision and care of the machine components most subject to wear;
- use of non-original components, whether they are spare parts, kits, accessories and optionals;
- causes of force majeure.
Furthermore, the manufacturer furthermore declines any and every responsibility for the failure to observe
the contents of this manual.
WARNING