AccessECU 2005, User Manual

Page: 17 / 70

17
A “Sending...” screen will quickly appear as the map is transferred to the ECU.
Once complete, a ‘Done: Press OK’ message will appear at the bottom.
Pressing the OK button will return you to the Main Menu.
At this point, you can safely disconnect the AccessPORT from the vehicle. The
vehicle may now be started.
NEVER disconnect the AccessPORT from the vehicle when performing this task
until you’ve received the Done message. NOTE: You do not need to have the
Test Mode Connector connected when using the [SWITCH MAP] feature.
See what Map is in use See what Map is in use
See what Map is in use See what Map is in use
See what Map is in use
From the Main Menu, highlight [SHOW CURRENT MAP] and press the OK
button. Only the current BASE map will be listed
Only the current BASE map will be listed
Only the current BASE map will be listed Only the current BASE map will be listed Only the current BASE map will be listed on the screen. Pressing the
OK button will return you to the Main Menu.
Note: The AccessPORT remembers the last Base map selected in its own internal
memory and it does not need to be connected or otherwise query the ECU to
perform this function.