AccessECU 2005, User Manual

Page: 51 / 70

V VV
VVehicle not starting after using AccessPORT
ehicle not starting after using AccessPORT
ehicle not starting after using AccessPORT ehicle not starting after using AccessPORT ehicle not starting after using AccessPORT
- If an error message was displayed, please refer to that section in this
troubleshooting guide.
- If no error message was given:
o Verify the Test Mode connector and Init Connector have been
properly removed.
o Disconnect the AccessPORT from the vehicle
o If that doesn’t work, turn ignition completely off for at least 30
seconds before attempting to restart.
o If that doesn’t work, disconnect battery for at least 1 hour to
clear ECU memory and try again.
o If that doesn’t work, attempt to re-initialize or reflash with a
base map again.
o If that doesn’t work, use the Map Management software to
verify the desired base map is supplied by an authorized map
provider (tuner). Contact the authorized map provider first
before attempting to contact your authorized distributor (if
they are not the same).
o If that doesn’t work, use the Map Management software to
download and load a new base map from a known good
source.
o If that doesn’t work, refer to “Service and Support” on page 34
for your authorized distributor contact information. They can
assist with additional troubleshooting steps.
If vehicle has undergone ANY other modifications since when you last started
the vehicle, please verify the proper installation and function of those modifica-
tions first.
V VV VVehicle not running properly/smoothly when using AccessPORT ehicle not running properly/smoothly when using AccessPORT ehicle not running properly/smoothly when using AccessPORT ehicle not running properly/smoothly when using AccessPORT ehicle not running properly/smoothly when using AccessPORT
- Verify selected Base and Realtime maps are correct for your vehicle’s
current modifications. Some maps may not be compatible with your
hardware. Contact your authorized map provider for assistance.
- Verify that all hardware installed is functioning properly and the vehicle
has been properly maintained. Any performance enhancing maps will
make any maintenance requirements more evident (ex. worn spark
plugs, dirty fuel filter).
- Verify the fuel octane requirements for the map in use are met. If
conditions occur after a fill up, drive conservatively until the bad fuel is
used and consider acquiring fuel from another source. Consider
draining the fuel from the tank if possible.
- If problems persist, contact your authorized map provider for
assistance.
51