AccessECU 2005, User Manual

Page: 20 / 70

Step 4: Step 4: Step 4: Step 4: Step 4:
Connect the DiagPORT cable (D-sub 9-pin) to the complementary connector on
the AccessPORT.
Step 5: Step 5:
Step 5: Step 5: Step 5:
Connect the red end of the supplied DiagPORT cable to the diagnosis port con-
nector located in the lower portion of the dash (below the steering wheel). The
AccessECU logo will be facing you (up). Make sure connection is firm and secure.
Step 6: Step 6:
Step 6: Step 6: Step 6:
From the Main Menu, highlight [CHANGE BASE MAP] and press the OK button.
Next, the AccessPORT will prompt you to select a Map that will be programmed
(flashed) to your ECU. Pressing the large round button (OK) will display a list of
available Base maps currently loaded on your AccessPORT.
Using the AccessPORT arrow keys, select the map that you wish to program
into your ECU. Once you have chosen your map, press the large round OK
button.
Map list on your AccessPORT may differ Map list on your AccessPORT may differ Map list on your AccessPORT may differ Map list on your AccessPORT may differ Map list on your AccessPORT may differ
from above.
from above.
from above. from above. from above.
20