Access AX600 EFI 4x4, Owner'S Manual

Page: 43 / 72

39

To change the engine oil
(with or without oil filter cartridge replacement)
* 1. Place the ATV on a level surface.
2. Remove the panel.
3. Place an oil pan under the engine to collect the used oil.
4. Remove the dipstick, and then remove the engine oil drain
bolt to drain the oil from the crankcase.
5. Remove the panel A.
6. Remove the oil filter cartridge with an oil filter wrench.
CAUTION:
* Be sure the engine oil is at the correct level, otherwise engine
damage may result.
Note:
* Skip steps 5~9 if the oil filter cartridge is not being replaced.
Panel
Oil filter cartridge
Oil filter wrench
Panel A
Engine oil drain bolt