Access AX600 EFI 4x4, Owner'S Manual

Page: 61 / 72

57
■ Checking the wheel bearings
The front and rear wheel bearings must be checked at the
intervals specified in the periodic maintenance and lubrication
chart. If there is play in a wheel hub or if a wheel dose not turns
smoothly, check the wheel bearing.
Replace the wheel bearings if necessary.
■
Checking the stabilizer bushes
The stabilizer bushes must be checked for crakes or damage at
the intervals specified in the periodic maintenance and
lubrication chart. Replace the stabilizer bushes if necessary.
■
Checking and lubricating the cables
The operation and the condition of all cables should be checked
before each ride, and the cables and cable ends should be
lubricated if necessary. If a cable is damage or dose not move
smoothly, please take it to a dealer or service center check or
replace it.
■ Lubricating the steering shaft
The steering shafts must be lubricated at the intervals specified
in the periodic maintenance and lubrication chart.
■
Lubricating the upper and lower arm pivots
The upper and lower arm pivots must be lubricated at the
intervals specified in the periodic maintenance and lubrication
chart.
■
Lubricating the knuckle shafts
The knuckle shafts must be lubricated at the intervals specified
in the periodic maintenance and lubrication chart.

Lubricating each part of the ATV
Visually check that all parts that need lubrication are sufficiently
lubricated.