19
Accelerator lever
The speed of the ATV is controlled via the accelerator lever.
The ATV speed increases when pressing the accelerator
lever using your thumb. Press the accelerator lever slowly.
When starting the engine or riding uphill, press the
accelerator lever slowly, the engine revs up and produces
more power.
To reduce the speed, release the accelerator lever.
e
Note:
The play of the accelerator lever should be 1 to 4 mm,
which can avoid jerking ahead when the engine is started.
Accelerator limiting device
To protect a new rider who is not familiar with this ATV
from an accident, this ATV is fitted with an accelerator
limiting device that can adjust the travel of the throttle
valve, which in turn limits engine power.
Adjustment:
*
Loosen the retaining nut, and then turn the adjusting
screw with a screwdriver rider. Turning clockwise will
reduce the travel of the throttle valve, while turning
counterclockwise will increase the travel and increase the
engine power up to its maximum.
*
When the appropriate engine power is reached, tighten
the retaining nut again.
((1) Retaining nut (2) Adjusting screw
(2)
(1)
Summary of Contents for AX600 EFI 4x4
