background image

End User Licensing Agreement 

You have acquired a PRC device which includes software licensed by PRC from Microsoft Licensing Inc. or its affiliates ("MS"). 

Those installed software products of MS origin, as well as associated media, printed materials and "online" or electronic 

documentation (software) are protected by international intellectual property laws and treaties.  

IF YOU DO NOT AGREE TO THIS END USER LICENSE AGREEMENT (EULA), DO NOT USE THE DEVICE OR COPY THE SOFTWARE.  

INSTEAD, PROMPTLY CONTACT PRENTKE ROMICH COMPANY FOR INSTRUCTIONS ON RETURN OF THE UNUSED DEVICE(S) FOR A 

REFUND.  

ANY USE OF THE SOFTWARE, INCLUDING BUT NOT LIMITED TO USE ON THE DEVICE, WILL CONSTITUTE YOUR 

AGREEMENT TO THIS EULA (OR RATIFICATION OF ANY PREVIOUS CONSENT). 

 

GRANT OF SOFTWARE LICENSE.   

This EULA grants you the following license: 

 

 

You may use the SOFTWARE only on your PRC device. 

 

NOT FAULT TOLERANT

.  THE SOFTWARE IS NOT FAULT TOLERANT.  PRC HAS INDEPENDENTLY DETERMINED HOW TO USE 

THE SOFTWARE AND MS HAS RELIED UPON PRC TO CONDUCT SUFFICIENT TESTING TO DETERMINE THAT THE SOFTWARE 

IS SUITABLE FOR SUCH USE. 

 

NO WARRANTIES FOR THE SOFTWARE. 

THE SOFTWARE is provided "AS IS" and with all faults.  THE ENTIRE RISK AS TO 

SATISFACTORY QUALITY, PERFORMANCE, ACCURACY, AND EFFORT (INCLUDING LACK OF NEGLIGENCE) IS WITH YOU. 

ALSO THERE IS NO WARRANTY AGAINST INTERFERENCE WITH YOUR ENJOYMENT OF THE SOFTWARE OR AGAINST 

INFRINGEMENT.  

IF YOU HAVE RECEIVED ANY WARRANTIES REGARDING THE DEVICE OR SOFTWARE, THOSE WARRANTIES 

DO NOT ORIGINATE FROM, AND ARE NOT BINDING ON, MS.  

 

Note on Java Support

.  The SOFTWARE may contain support for programs written in Java.  Java technology is not fault 

tolerant and is not designed, manufactured, or intended for use or resale as online control equipment in hazardous 

environments requiring fail-safe performance, such as in the operation of nuclear facilities, aircraft navigation or 

communication systems, air traffic control, direct life support machines, or weapons systems, in which the failure of Java 

technology could lead directly to death, personal injury or severe physical or environmental damage.  Sun Microsystems, 

Inc. has contractually obligated MS to make this disclaimer. 

 

No Liability for Certain damages.  

EXCEPT AS PROHIBITED BY LAW, MS SHALL HAVE NO LIABILITY FOR ANY INDIRECT, 

SPECIAL CONSEQUENTIAL OR INCIDENTAL DAMAGES ARISING FROM OR IN CONNECTION WITH THE USE OR 

PERFORMANCE OF THE SOFTWARE.  THIS LIMITATION SHALL APPLY EVEN IF ANY REMEDY FAILS OF ITS ESSENTIAL 

PURPOSE.  IN NO EVENT SHALL MS BE LIABLE FOR ANY AMOUNT IN EXCESS OF U.S. TWO HUNDRED FIFTY DOLLARS (U.S. 

$250.00). 

 

Limitations on Reverse Engineering, Decompilation and Disassembly.  You may not reverse engineer, decompile, or 

disassemble the SOFTWARE, except and only to the extent that such activity is expressly permitted by applicable law 

notwithstanding this limitation. 

 

SOFTWARE TRANSFER ALLOWED BUT WITH RESTRICTIONS

.  You may permanently transfer rights under this EULA only as 

part of a permanent sale or transfer of the Device, and only if the recipient agrees to this EULA.  If the SOFTWARE is an 

upgrade, any transfer must also include all prior versions of SOFTWARE. 

 

EXPORT RESTRICTIONS

. You acknowledge that SOFTWARE is subject to U.S. export jurisdiction.  You agree to comply with 

all applicable international and national laws that apply to the SOFTWARE, including U.S. Export Administration 

Regulations, as well as end-user, end-use and destination restrictions issued by U.S. and other governments.  For 

additional information see 

http://www.microsoft.com/exporting/

.   

 

Accent 800 Hardware Manual 

Page 3 

Summary of Contents for 800





































Reviews: