Accelerated 6330-MX, Manual, Page: 76 / 140

Load Balancing Load Balancing
Difficulty level:
Easy Easy
Goal Goal
To configure additional WAN interfaces on the 63xx-series router in tandem with its primary
WAN uplink such that all interfaces share the network load for Internet connectivity.

NOTE: NOTE: The cellular plug-in module is available as a WAN interface by default, though additional
interfaces can be configured. For more information please refer to the configuration example for
Dual Dual
WAN Ethernet Ports WAN Ethernet Ports .
Setup Setup
This article assumes the LAN ports are operating under default settings, which provide DHCP
connectivity to devices connected to the 63xx-series router's LAN ports. For more details on the
default settings of the 6350-SR, see the Default Settings Default Settings section of the User Manual.
For this setup, you will need the 63xx-series router with both a primary WAN Ethernet
connection and a secondary means of WAN access.
Sample Sample
The sample configuration below shows a 6350-SR with two Internet connections: a cellular-
based WAN connection through the 6350-SR's modem, and a broadband-based WAN
connection through the 6350-SR's WAN Ethernet port. Both WAN interfaces will be utilized
equally, sharing 50% of the WAN network traffic.
Accelerated Notices
Page 76 Page 76 6330-MX / 6335-MX