Accelerated 6330-MX, Manual, Page: 61 / 140

Change Port 3 from WAN to LAN Change Port 3 from WAN to LAN
Difficulty level:
intermediate intermediate
Goal Goal
To change the functionality of the 633x-MX router's port #3 from a WAN connection to be a
part of LAN.
Setup Setup
This article assumes the 633x-MX router is operating under default settings, which provide
DHCP connectivity to devices connected ports 1 and 2 of the 633x-MX. For more details on the
default settings of the 633x-MX, see the Default Settings section of the 6330-MX User's Manual.
Also, refer to the Getting started with Accelerated View for details on how to configure a
6330-MX (or the Local device management section, if you are managing the device without
Accelerated View).
Configuration Steps Configuration Steps
Open the configuration profile for the 6330-MX and make the following changes.
1. Under
Network -> Interfaces -> WAN Network -> Interfaces -> WAN
, de-select the
Enabled Enabled
checkbox.
2. Under Network -> Bridges -> LAN -> Devices Network -> Bridges -> LAN -> Devices , click Add Add and select Ethernet: WAN Ethernet: WAN from the
drop-down.
Accelerated Notices
Page 61 Page 61 6330-MX / 6335-MX