manualshive.com logo in svg

Accelerated 6330-MX, Manual, Page: 34 / 140

Share
Download
Accelerated 6330-MX Manual Download Page 34

Interface Configuration

Interface Configuration

Changing the LAN Subnet

Changing the LAN Subnet

The default subnet -- 192.168.2.1/24 -- is set in the IPv4 Address field of the LAN interface, and

can be adjusted to any range of private IPs by completing the following steps:

1. Expand the configuration page to Network > Interfaces

Network > Interfaces.

2. Select the LAN interface that needs to be adjusted and expand its IPv4 entry.

3. The Address

Address field contains the range of IPs available for assignment.

NOTE:

NOTE: The subnet mask must also be specified.

Changes made to the IPv4 Address must also be updated in the DHCP server entry to preserve
functionality.

Creating New Interfaces

Creating New Interfaces

Additional interfaces may be configured to further differentiate port functionality:

1. Expand the configuration page to Network > Interfaces

Network > Interfaces.

2. Name the new Interface

Interface using the text field at the bottom of the list, clicking the Add

Add button

to continue.

Accelerated Notices

Page 34

Page 34

6330-MX / 6335-MX

Summary of Contents for 6330-MX













































































































































Reviews:

No comments