Accedian EtherNID EE, Administrator'S Manual

Page: 31 / 206

3: Management & Configuration
Different fields will appear depending on the selections you make for Interface type.
3. Define interface parameters as required by your setup and then click Apply.
Interface settings
NOTE: It is valid to set the IP address for an interface to 0.0.0.0 when the interface is not required to be an IP interface.
For example, when the interface is used for OAM or test set interaction.
State
Enable or disable the interface. Upon interface creation, the default is enabled.
Interface name
Specify a name to identify the interface.
Interface type
Sets the interface type to use. Select one of the following options:
•
Standard: Standard IP interface associated with a single port.
•
Bridge: Bridged interface than connects two or more ports.
•
VLAN: VLAN interface associated with a single port.
•
VLANinVLAN: VLAN in VLAN (.1q in .1q) interface associated with a single port.