Abus Terxon LX, Administration Manual, Page: 4 / 32

2
1. Introduction
Dear Customer,
Thank you for purchasing the TERXON L burglar alarm system. You made the
right decision in choosing this state-of-the-art technology, which complies with the
current standards of domestic and European regulations.
The CE has been proven and all related certifications are available from the
manufacturer upon request.
The TERXON L system uses the most modern technology for the comprehensive,
flexible protection of your private and commercial property. In combination with
other components such as detectors and signal transmitters, it secures the areas
to be monitored.
1.1. General
To ensure proper and safe operation, it is your obligation to observe these
operating instructions!
These administrator instructions describe the options in the user menu and are
intended for persons with advanced access rights following complete installation.
For example, you can enter new user codes, view the event memory or exclude
zones from monitoring. If you have any questions on activating, deactivating or
resetting the burglar alarm system, refer to the operating instructions.
If you have any questions on installation or other problems, contact your engineer
or authorised dealer.
To ensure smooth operation, discuss any system changes with the engineer. It will
help you to document your system during the initial installation. You can use the
tables at the end of the manual for this purpose.
1.2. Access to user menu
1. Enter your user code on the keypad or hold your chip-key against the
control panel.
2. Press
The “Omit Zones” option is displayed.
Important: ...................................................................................................................
Access to options depends on the user menu (please see “User types“ on page
10).
1.3. Selecting an option
You can select an option in two ways:
1. Select an option with or and confirm with .
2. Press a number key (0–9), for example 1 for “Omit Zones”, and confirm
with .
BANNER TEXT
17:30 Sun 01 JAN
Set Partitions ?
Ptns > ***.....
User Menu
1:Omit Zones