Abus AZWG10200 Manual Download Page 15 | Manualshive

Page: 15 / 40

Abus AZWG10200 Manual Download Page 15

15

Connecting the AZWG10200-PSTN/IP CONVERTER

Port forwarding
Some  administrative  information  can  be  stored  under  premises  data.  The  IP
address  and  port  can  be  entered  for  remote  access  to  the  AZWG10200-
PSTN/IP  CONVERTER.  Port 64001  is  used  by  default  for  remote  access.  The
port  number  can  be  changed  under  Options > Settings > Remote
access/upgrade.

Check  whether  the  AZWG10200-PSTN/IP  CONVERTER  is  supplied  with  power
and connect the device to the computer

/.

laptop via the mini USB cable or use

the 'Remote access' option to connect.

The external IP address can be entered for remote access to the AZWG10200-
PSTN/IP CONVERTER.

Remote access progress is displayed on the right-hand side:

ParamIt

+ automatically detects the AZWG10200-PSTN/IP CONVERTER and

opens the start screen. The product information is displayed along with the
firmware version. The status of the USB or remote connection is indicated at
the bottom left of the screen with a green icon.

«
...
13
14
15
16
17
...
»

Summary of Contents for AZWG10200









































Reviews:

No comments