Abus AZWG10020, Installation And Operating Instructions Manual

Page: 128 / 301

52 UK
The explanations of all possible display messages can be found below:
“Idle”
The device is idle and not placing any
calls at the moment.
“Clearing Call”
The device is disconnecting the
telephone connection of the
downstream device.
“Wait Dial Tone”
The device is waiting for the dial tone
from the telephone network.
“Dialling Number”
The device is dialing the telephone
number of the destination.
“Wait for Ring”
The devices is waiting for the ring
tone from the destination.
“Connecting”
The device hears the ring tone and is
waiting for the other party to pick up
the phone.
“Wait for Clear”
The device is waiting for the other
party to hang up (end of call).
“Call Busy”
The telephone number of the
destination is busy.
“Call NU”
The device is receiving the tone that
indicates a wrong number. Receiving
PSTN tones is taking too long. A time-
out has occurred.
“Call Fail”
The call failed.
“Call Error”
Call error (such as no GSM signal
present).
“Call No Ring”
The device did not receive a ring tone
from the destination.
“Call No Answer”
The destination is not answering.
“Connected”
The telephone connection has been
established.
“HS Orig V22bis”
The handshake of the PSTN
connection setup is in progress.
“Connect 2400”
The PSTN connection has been
established at 2400 baud.
“Connect 1200”
The PSTN connection has been
established at 1200 baud.
“HS Answ V22bis”
The device is receiving an answer to
its handshake during the PSTN
connection setup.